D i s p l a y / P o w e r
D e v i c e I n f o r m a t i o n
28
The Display/Power page is used
to configure the following functions
• Screen Brightness adjusts the
brightness of the display.
• Automatic Shutdown enables
and disables automatic
shutdown. If enabled, the meter
will shut itself off after
20 minutes of inactivity.
To display general information
®
about the VelociCalc
Air Velocity
Meter, select Device Information
from the Settings Menu. The
Device Information page lists the
meter model number, serial
number, and many other
characteristics of the device,
including information about the
attached probe.
To update the VelociCalc
soft key
and follow the instructions provided.
®
®
VelociCalc
/VeloCalc
Pro Air Velocity Meter 9600 Series
®
meter firmware, press the update firmware
Need help?
Do you have a question about the VelociCalc 9600 Series and is the answer not in the manual?