Connecting The Optional Bluetooth Portable Printer Device (Model 9650 Only) - TSI Instruments VelociCalc 9600 Series Operation And Service Manual

C o n n e c t i n g t h e O p t i o n a l B l u e t o o t h
P r i n t e r D e v i c e ( M o d e l 9 6 5 0 o n l y )
10
• Thermocouples from an alternate TSI
metal sheath electrically isolated from the wires inside. Failure
to meet this requirement may result in false readings, electrical
shock, or fire hazard.
• DO NOT use the instrument or probes near hazardous voltage
sources since serious injury could result.
To connect the Bluetooth
the Model 9650, power on the unit
and the printer.
1. Navigate to Settings ->
Bluetooth and Enable
Bluetooth checkbox.
2. Highlight SCAN and
press Enter.
3. The unit will scan and find
compatible Bluetooth
4. Highlight printer and
press Enter.
5. The unit will display a message
of "Connected" when
successful.
Bluetooth is a registered trademark of Bluetooth SIG.
® ®
VelociCalc /VeloCalc Pro Air Velocity Meter 9600 Series
W A R N I N G S
®
supplier must have the
®
®
printer to
®
printers.
P o r t a b l e