Virtual Server Config - D-Link DWR-953 User Manual

Section 3 - Configuration
Virtual
Check this box to enable the virtual server.
Server:
Specify the name of the rule for reference. Alternatively, select
Rule Name: known service from the box on the right and click << to
automatically populate all fields.
Interface:
Specify which interface the rule is bound to.
Public Port:
Specify the public port(s) that will trigger the rule.
Private Port: Specify the port of the client hosting the server on your LAN.
Protocol Specify the protocol type that triggers the virtual server rule.
Type:
Public IP: Specify the public IP of a service to which the filter rule will
apply.
Private IP:
Enter an IP address of the client hosting the server on your LAN.
Time
Select the time schedule during which the virtual server rule is
Schedule: active. To create a new time schedule, click New Time Schedule.
Click Apply to save your settings, Cancel to revert to your previous settings, or Back
to return to the previous screen.
D-Link DWR-953 User Manual

Virtual Server Config

48