D-Link DWR-953 User Manual page 33

Section 3 - Configuration
IPv6 DNS settings
Enable: Check this box to enable WAN connection over IPv6
Connection Enter a name for this connection
Name:
DHCP Mode: Specify how your IPv6 WAN connection will get an IP address.
Choose from Auto, Stateless, DHCPv6 Stateful, or DHCPv6
Stateless.
DNS Mode: Specify if DNS address are obtained automatically or enter them
manually.
DNS If you selected manual DNS, enter the primary and secondary
Addresses:
DNS server addresses.
DS-Lite: Dual Stack Lite (DS-Lite) is used by some ISPs to manage IPv4-
IPv6 transitions. Check this box if your connection uses DS-Lite.
AFTR IPv6 If DS-Lite is enabled, enter the AFTR IPv6 address provided by
Address:
your ISP.
Click Apply to save your settings, or Cancel to revert to your previous settings.
D-Link DWR-953 User Manual
Autoconfiguration (SLAAC/DHCPv6)
28