Section 3 - Configuration
Type:
Select an EtherType from the dropdown menu to which the rule
will apply.
Protocol:
Select a protocol from the dropdown menu to which the rule will
apply.
Position:
Rules are evaluated based on position starting with rule 0.
The rules are applied from lowest to highest until the rules are
exhausted or one is triggered.
Condition:
Indicates a python logical operator to be performed on the
value.
Value:
Indicates the value the rule will use to evaluate trigger
conditions.
Rule Action:
Indicates the action taken when the rule is triggered.
Action:
Click the pencil ( ) icon to edit the rule, click the trash can icon
( ) to delete the rule.
Click Add to add a new generic rule, described in Packet Filter -- Generic Rules
on page 70.
D-Link DWR-953 User Manual
66