Vpn Passthrough - D-Link DWR-953 User Manual

Section 3 - Configuration

VPN Passthrough

The device supports VPN (Virtual Private Network) passthrough for PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol), and
IPSec (IP security). Once VPN passthrough is enabled, there is no need to create any Virtual Server or Port Forwarding entries in order for outbound
VPN sessions to establish properly. Multiple VPN connections can be made through the device. This is useful when you have many VPN clients on
the Local Area Network. For each VPN type, check Enable to activate the passthrough, and specify a port. Click Apply to save your settings, or
Cancel to revert to your previous settings.
D-Link DWR-953 User Manual 52