D-Link DWR-953 Quick Installation Manual
Wireless ac1200 4g lte router
with gigabit ethernet ports
Hide thumbs
Also See for DWR-953:
- User manual (264 pages) ,
- Quick installation manual (61 pages) ,
- User manual (163 pages)
Related Manuals for D-Link DWR-953
Summary of Contents for D-Link DWR-953
- Page 1 Quick Installation Guide DWR-953 Wireless AC1200 4G LTE Router with Gigabit Ethernet Ports...
-
Page 2: Before You Begin
If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product. -
Page 3: Default Settings
Router DWR-953 with default settings cannot connect to the Internet. To get started, please set your own password for access to the web- based interface and change the WLAN name (SSID); then, if needed,... -
Page 4: System Requirements And Equipment
DWR-953 Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: • ◦ Apple Safari 8 and later ◦ Google Chrome 48 and later ◦... -
Page 5: Pc With Ethernet Adapter
DWR-953 Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC. 2. To connect via built-in LTE modem: insert a SIM card into the slot on the right side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks. - Page 6 DWR-953 Quick Installation Guide Obtaining Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 7 DWR-953 Quick Installation Guide 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. 7. Click the OK button in the connection properties window.
-
Page 8: Pc With Wi-Fi Adapter
DWR-953 Quick Installation Guide PC with Wi-Fi Adapter 1. To connect via built-in LTE modem: insert a SIM card into the slot on the right side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks. - Page 9 DWR-953 Quick Installation Guide Obtaining Address Automatically Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 10 DWR-953 Quick Installation Guide 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. 7. Click the OK button in the connection properties window.
- Page 11 9. In the opened window, in the list of available wireless networks, select the wireless network DWR-953 (for operating in the 2.4GHz band) or DWR-953-5G (for operating in the 5GHz band) and click the Connect button. 10. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Security key field and click the OK button.
-
Page 12: Configuring Router
DWR-953 Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the domain name of the router (by default, dlinkrouter.local) with a dot at the end and press the Enter key. Also you can enter the IP address of the device (by default, 192.168.0.1). - Page 13 DWR-953 Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
- Page 14 DWR-953 Quick Installation Guide The Summary page displays general information on the router and its software.
- Page 15 DWR-953 Quick Installation Guide The Home page displays links to the most frequently used pages with device's settings. The web-based interface of the router is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web-based interface of the router or in the System / Configuration section of the menu.
-
Page 16: Initial Configuration Wizard
Click the OK button and wait until the factory default settings are restored. If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DWR-953 (see the WLAN name (SSID) in the Default Settings section, page 3) and click the NEXT button. - Page 17 DWR-953 Quick Installation Guide 1. Click YES in order to leave the current language of the web-based interface or click NO to select another language. 2. On the next page, click the CONTINUE button.
-
Page 18: Selecting Operation Mode
DWR-953 Quick Installation Guide Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value. In this mode you can configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to... - Page 19 DWR-953 Quick Installation Guide In order to connect your device to a private Ethernet line, on the Device mode page, from the Connection method list, select the Ethernet (LAN) value. In this mode you can configure one of the router's LAN port as the WAN port, configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to...
-
Page 20: Creating Lte Wan Connection
DWR-953 Quick Installation Guide Creating LTE WAN Connection This configuration step is available for the 3G/LTE modem mode. 1. If the PIN code check is enabled for the SIM card inserted into the built- in modem, enter the PIN code in the PIN field and click the APPLY button. - Page 21 DWR-953 Quick Installation Guide Configuring LAN Port as WAN Port This configuration step is available for the Ethernet (LAN) mode. 1. On the Device connection page, select a free LAN port which will be used as the WAN port. Click the NEXT button.
- Page 22 DWR-953 Quick Installation Guide Configuring Wired WAN Connection This configuration step is available for the Ethernet (WAN) and Ethernet (LAN) modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
- Page 23 DWR-953 Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access): Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 24 DWR-953 Quick Installation Guide PPTP + Dynamic IP or L2TP + Dynamic IP: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 25 DWR-953 Quick Installation Guide If your ISP uses MAC address binding, select the Clone MAC address of your device checkbox. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID field.
-
Page 26: Configuring Wireless Network
DWR-953 Quick Installation Guide Configuring Wireless Network 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the router. - Page 27 DWR-953 Quick Installation Guide 4. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox. 5. In the Network name field, specify your own name for the guest wireless network or leave the value suggested by the router.
-
Page 28: Configuring Lan Ports For Iptv/Voip
DWR-953 Quick Installation Guide Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Ethernet (WAN) and Ethernet (LAN) modes. 1. On the IPTV page, select the Is an STB connected to the device checkbox. 2. Select a free LAN port for connecting your set-top box. -
Page 29: Changing Web-Based Interface Password
DWR-953 Quick Installation Guide Changing Web-based Interface Password On this page you should change the default administrator password. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout. -
Page 30: Configuring Local Area Network
DWR-953 Quick Installation Guide Configuring Local Area Network Go to the Connections Setup / LAN page. If needed, change the IPv4 address of the router's LAN interface and the mask of the local subnet. To do this, click the IPv4 tab and specify needed values in the IP address and Subnet mask fields in the Local IP Address section. - Page 31 DWR-953 Quick Installation Guide IPv4 address assignment. By default, the built-in DHCP server of the router assigns IPv4 addresses to the devices of the LAN. If you want to manually assign IPv4 addresses, disable the DHCP server (click the IPv4 tab and select the Disable value from the Mode of dynamic IP address assignment drop-down list in the Dynamic IP Addresses section).
- Page 32 DWR-953 Quick Installation Guide IPv6 address assignment. By default, the devices of the LAN automatically assign IPv6 addresses to themselves (the Stateless value is selected from the Mode of dynamic IPv6 address assignment drop-down list in the Dynamic IPv6 Addresses section on the IPv6 tab).
-
Page 33: Specifications
DWR-953 Quick Installation Guide SPECIFICATIONS Hardware · Processor RTL8685PB (1GHz) · 128MB, DDR2, built-in processor · Flash 16MB, SPI · Slot for SIM card (mini-SIM) Interfaces · 10/100/1000BASE-T WAN port · 4 10/100/1000BASE-T LAN ports · POWER LEDs · INTERNET ·... - Page 34 DWR-953 Quick Installation Guide Software · WAN connection types · PPPoE · IPv6 PPPoE · PPPoE Dual Stack · Static IP / Dynamic IP · Static IPv6 / Dynamic IPv6 · PPPoE + Static IP · PPPoE + Dynamic IP ·...
- Page 35 DWR-953 Quick Installation Guide Software · Local and remote access to settings through Management TELNET/WEB (HTTP/HTTPS) · Multilingual web-based interface for configuration and management · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface ·...
- Page 36 DWR-953 Quick Installation Guide Wireless Module Parameters · IEEE 802.11n/ac Standards · IEEE 802.11b/g/n · 2400 ~ 2483.5MHz Frequency range · 5150 ~ 5350MHz · 5650 ~ 5725MHz · Wireless connection security · WPA/WPA2 (Personal/Enterprise) · МАС filter · WPS (PBC/PIN) ·...
-
Page 37: Operating Environment
DWR-953 Quick Installation Guide Wireless Module Parameters Receiver sensitivity · 802.11b -76dBm at 11Mbps · 802.11g -65dBm at 54Mbps · 802.11n HT20 -64dBm at MCS15 HT40 -61dBm at MCS15 · 802.11ac HT20 -56dBm at MCS8 HT40 -53dBm at MCS9 HT80... -
Page 38: Safety Rules And Conditions
DWR-953 Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents. -
Page 39: Technical Support
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.