D-Link DWR-953 User Manual page 80

Section 3 - Configuration
Query
Specify the Query Response Interval which is the maximum
Response
amount of time in seconds that the router waits to receive
Interval:
a response to a General Query message. It is the Maximum
Response Time field in the message header. The default query
response interval is 10 seconds and must be less than the query
interval.
Host Timeout:
Specify the time in which hosts must reply to queries within this
value in seconds or be dropped from the group.
Leave
Specify the amount of time the host waits to receive an new
Timeout:
IGMP join message after leaving the current group. If it does not
receive a join message in the specified time, it times out.
IGMP Max Specify the maximum number of groups a host can join.
Groups:
For Snooping and Proxy:
LAN1-4, 2.4, Select Enable to enable IGMP on this interface.
and 5 GHz
Wireless:
Click Apply to save your settings.
D-Link DWR-953 User Manual 75