D-Link DWR-953 User Manual page 16

Wireless ac1200 4g lte multi-wan router
Hide thumbs Also See for DWR-953:
Table of Contents

Advertisement

Section 3 - Configuration
Access point
Enter the access point name provided by your carrier.
Name (APN)
(Optional):
PIN Number
If your SIM/USIM card is protected with a PIN number, enter it here.
(Optional):
Note that repeatedly entering the wrong PIN may cause the SIM
card to become locked.
Reconnect
Select Auto or Manual to determine whether the router should
Mode:
reconnect to your 3G/4G network automatically or manually.
Maximum
Set the maximum time your connection can be idle before
Idle Time:
disconnecting. Set it to 0 or choose Auto in Reconnect Mode to
disable this feature.
Keep Alive:
Select Use Ping to have the router periodically ping an IP address
in an attempt to maintain a connection. Some ISPs will close your
connection if no activity is detected.
Ping IP
If Keep Alive has been set to Use Ping, enter an IP address to be
Address:
pigned.
Ping Interval:
If Keep Alive has been set to Use Ping, specify an interval between
the pings in seconds. The default setting is 60 seconds.
Radio
Check this box to enable cellular radios. If this box is unchecked,
Frequency:
the 3G/4G radios will be disabled.
WAN Ping
Check this box to enable response when the router is pinged.
Enable:
Click Apply to save your settings, or Cancel to revert to your previous settings.
D-Link DWR-953 User Manual
11

Advertisement

Table of Contents
loading

Table of Contents