Virtual Server - D-Link DIR-878 User Manual

Section 3 - Configuration
The Virtual Server allows you to specify a single public port for redirection to an internal LAN IP Address and Private LAN port.
From the Port Forwarding page click Virtual Server.
The DIR-878 can store a maximum of 15 rules. If you wish to remove a rule, click on
its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil
icon in the Edit column. If you wish to create a new rule, click the Add Rule button
Click Save when you are done.
When you click on Add Rule, the Create New Rule window will open. Enter the required
information into the fields described below:
Name: Enter a Name for the new rule or select an application from the
drop-down menu.
Local IP: Enter the IP address of the computer on your local network that
you want to allow the incoming service to. Or, select the Computer
Name from the drop-down menu.
Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both,
or Other).
If you selected Other, enter the Protocol Number.
Protocol
Number:
External Port:
Enter the public port you want to open.
Internal Port: Enter the private port you want to open.
Schedule:
Use the drop-down menu to select a schedule when the rule will
be enabled. The schedule may be set to Always Enable, or create
your own schedule from the Schedules section (refer to page 66).
Click Apply when you are done.
D-Link DIR-878 User Manual

Virtual Server

.
58