Showing Content With People+Content Ip - Polycom VSX3000 Getting Started Manual

Showing Content with People+Content IP

© Polycom, Inc.
To install the People+Content IP application on a computer:
1. On a computer with Windows XP or Windows 2000, open a web
browser and go to www.polycom.com.
2. Download and install the People+Content IP application from the
Polycom Resource Center.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address of your video conferencing system and the
meeting password, if one is set.
3. Click Connect.
4. Open the content you want to show, and do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
If you have content sources connected to your VSX system and you press Graphics on
the remote control, you are prompted to select the content source to use.
When you are sending content, the
main monitor. Depending on the configuration of your system, you may also
see the content on your monitor or projector.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
3. If others in the conference want to send content from the same VSX
system using People+Content IP, click Disconnect to disconnect from
the VSX system so that they may connect. Only one computer at a time
can be connected.
S C
HOWING ONTENT AND
content sharing icon appears on your
V S
IDEO OURCES
17