Displaying The Far Site's Name When The Call Connects - Polycom VSX3000 Getting Started Manual

Displaying the Far Site's Name When the Call Connects

© Polycom, Inc.
4. Scroll to PIP, press
Select this setting...
Camera
Auto
On
Off
5. Press Home to save your change and return to the Place a Call
screen.
Depending on your system configuration, you can specify whether to display
the far site's name when the call connects and how long to leave the name on
the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Far Site Name Display Time, press
control, and select to display the far site's name during the entire call,
for a specified time, or not at all.
5. Press Home to save your change and return to the Place a Call
screen.
, and select one of these settings:
To show the PIP...
When you press any of the camera control
buttons.
On connection and when you pick up the
remote control.
On connection and during the call.
Only when you press
control.
C Y W
USTOMIZING OUR ORKSPACE
PIP on the remote
on the remote
41