Polycom VSX3000 Getting Started Manual page 15

© Polycom, Inc.
To view your near-site presets (VSX set-top and component systems):
Press Preset on the remote control.
Icons for presets 0-9 are shown on the screen. The colored icons indicate
stored camera positions, and the gray icons indicate available presets.
To store a preset:
1. If you are in a call, press
far-site camera or other video source.
2. If you selected a camera that supports electronic pan, tilt, and zoom,
you can adjust the camera's position:
Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
Press Zoom to zoom the camera out or in.
3. Press Preset on the remote control.
4. Press and hold a number to store the preset position. To store a
double-digit preset, press the first digit quickly and hold the second
number down. Any existing preset stored at the number you enter is
replaced.
The system uses preset 0 as the default camera position.
To delete all presets:
1. If a call is connected, press
source.
2. Press Preset on the remote control.
3. Press Delete to delete all presets.
You cannot delete just one preset. Instead, override an existing preset with the new
camera position.
Near or Far to choose a near-site or
Near to choose a near-site video
C W Y S
ONTROLLING HAT OU EE
11