Important Safety Instructions - GVM -PRO-SD650B Manual

IMPORTANT SAFETY INSTRUCTIONS

First and foremost: this product is a professional lighting and staging equipment
and should be used by a professional lighting technician or under the guidance of a
professional. When using this product, you must always follow the cautions below:
1．Read the product manual carefully before use.
2．This product is only suitable to use in a temperature range of -20℃ to 45℃.
3．Do not place the equipment near flammable and volatile solvents such as alcohol
and gasoline.
4．Before storing the device, make sure it has cooled down completely. When being
stored, unplug the power cord from the device. The equipment should be stored in
its carrying case or a well-ventilated and dry place.
5．This lighting fixture is not for general illumination and should not be used as such.
Individuals with eye injuries or sensitivity should avoid using this lighting fixture.
6．This is a professional light and children are prohibited from using it. Parents or
guardians must closely supervise children when they are near the equipment to
prevent personal injury caused by colliding with or misusing the equipment.
7．Before using the equipment, please remove the protective cover.
8．When the lighting fixture is on, it is forbidden to stare directly at the light source
under any circumstances. High-intensity lighting should only be used under the
guidance of a professional lighting technician. Avoid staying in a high-intensity light
environment for a long time. If feeling any discomfort, please immediately turn off
the lighting fixture, and seek medical attention.
9．When the lighting fixture is on, use it carefully and avoid contacting high-
temperature components such as LED light sources to prevent being burnt.
10.Do not use damaged equipment or accessories. Wait for a professional repairman to
inspect and repair it before it is confirmed that the equipment can function normally.
11.If the light source is damaged or deformed due to heat, please stop using it and
contact the manufacturer, service agents, or qualified repairman promptly to replace
the light source to avoid accidents.
12.If the product is cracked due to falling, squeezing, or strong impact during use,
please stop use it to avoid being electrically shocked by touching internal electronic
components.
13.Do not disassemble the product by yourself. If the product malfunctions, it must be
checked and repaired by the manufacturer or authorized repair personnel.
14.Before cleaning and maintenance, be sure to unplug the power
never pull on the cable but always pull the plug itself. This device shall only operate
with earthed power outlets or emergency power generators.
1
supply. To unplug