Feature Limitations - Polycom V500 Release Note

Release Notes
V500 and VSX systems, version 8.5

Feature Limitations

The feature limitations for version 8.5 are listed in the following table. If a
workaround is available, it is noted in the table.
Feature Limitation
AES Encryption You cannot activate encryption during a call.
Analog Phone Incoming POTS (analog phone) calls will not be reported in
the Recent Calls list.
API The prilinebuildout set command does not work for
values -7.5 and -22.5.
Some color scheme modes may not be selectable using API
commands.
The vcstream register command does not work from the
API interface.
The remotecontrol enable all command is not working.
So if remote control is disabled from the API interface, you
must restart the system to enable it again.
The notify sysalerts command does not return status
information on Auto Answer settings.
The gatewayprefix set and gatewaysuffix set API
commands accept special symbols as value parameters.
Entering another gatewayprefix set or gatewaysuffix
set command with any value parameter forces the system to
restart.
The chaircontrol set_password command does not work.
The notify vidsourcechanges command does not notify
about selecting a content source.
Currently API interfaces do not report when the system
restarts.
Use the command callinfo all instead of display call.
If rollover dialing occurs (e.g. the system automatically
redials a number as ISDN if it fails to connects when dialed
as IP), the system will report an "ended" event for each failed
attempt.
15