Polycom V500 Release Note page 6

Release Notes
V500 and VSX systems, version 8.5
New API Commands
The following API commands are new in version 8.5.
addressdisplayedingab
Specifies whether to make the system address public or private in the global
directory.
addressdisplayedingab get
addressdisplayedingab private
addressdisplayedingab public
camerainput
Sets or gets the format for a video source.
camerainput {1..3} <get|s-video|composite>
configpresentation
Sets or gets the content presentation settings for Monitor 1 or Monitor 2.
configpresentation get
configpresentation <monitor1|monitor2> get
configpresentation monitor1 <near|far|content|near-or-far|
content-or-near|content-or-far|all>
configpresentation monitor2 <near|far|content|near-or-far|
content-or-near|content-or-far|all>
configpresentation monitor1 "value" monitor2 "value"
dialingentryfield
Sets or gets the configuration of the dialing entry field on the Place a Call
screen.
dialingentryfield <get|yes|no>
enablefirewalltraversal
Sets or gets the Enable NAT/Firewall Traversal setting. This feature requires
an Edgewater session border controller that supports H.460.
enablefirewalltraversal <get|on|off>
enablersvp
Sets or gets the RSVP (Resource Reservation Setup Protocol) setting on the
system, which requests that routers reserve bandwidth along an IP connection
path.
enablersvp <get|yes|no>
6