Polycom V500 Release Note page 14

Release Notes
V500 and VSX systems, version 8.5
Issue Description
Web Interface On a VSX 6000, the web interface sometimes listed
Pro-Motion™ video even thought it was not valid for the
VSX 6000. This has been corrected.
An Internet Explorer web browser sometimes needed to be
restarted if it was being used to monitor a VSX system while
call preferences were changed between H.323 and SIP from
the embedded interface. This has been corrected.
If you toggled between H.323 and SIP enabled from the web
interface, the change was not implemented the first time (both
were disabled). You had to make the change a second time for
the new setting to be activated. This has been corrected.
When you changed the ISDN Switch Protocol from the
system's web interface and then clicked Update, only the first
line was shown. If you waited 5-10 seconds and pressed
refresh, all four lines were shown again. This has been
corrected.
After you created a multi-site entry in the directory via the web
interface and then tried to create another multi-site entry, the
participants you entered for the previous entry appeared in the
participants window. This has been corrected.
When browsing certain pages in the web interface using
Internet Explorer with the Sun Java plug-in installed, you may
have been asked to enter the admin user ID and
password. This has been corrected.
14