Polycom V500 Release Note page 9

Release Notes
V500 and VSX systems, version 8.5
Corrected Issues in Version 8.5
The following table lists issues corrected in version 8.5.
Issue Description
API Previously there was no way to enable VGA mode for monitor 2
through API commands. The configdisplay command
provides this ability.
When setting the administrator password from the API
interface, you can use the # and * characters. You can now use
the Alt key on the onscreen keyboard to access these
characters in the embedded user interface.
Cameras You can calibrate a PowerCam™ Plus for auto camera tracking
(VSX systems) without disabling stereo.
Auto Camera Tracking and Auto Camera Tracking to Presets
remain enabled after a system restart.
Chair Control When using chair control, it no longer takes two clicks to
acquire chair control.
PVX™ systems are listed as meeting participants during chair
control.
Content The Content Statistics screen displays transmit statistics for the
Statistics People+Content IP application.
Directory You can add a multipoint entry to a custom category.
Global If you received a support acknowledgement message from
Management Global Management System, you no longer need to press the
System Home button on the remote to make the message go away.
Global Management System provisioning of the Primary and
Secondary Call Types is now supported.
Interoperability H.239 functions properly with Aethra Vega Star Gold 6.0.30.
Aethra
Interoperability H.239 now works with TANDBERG B10.2 (which can receive
H.239 VGA and SVGA resolutions for content), MGC 7.5.0.52, Sony
PCS-1 3.22, TANDBERG 6000 MXP F4.1, iPower 62.0.1208,
TANDBERG E5.2.
Interoperability In H.323 multipoint calls using AES encryption, with a
iPower™ VSX system as the MCU and iPower and PVX systems as
endpoints, iPower did not transmit video if PVX was the second
endpoint. This has been corrected.
Interoperability With MGC 7.0.0.72, far end camera control did not always work
MCU if all sites in a voice-switched conference were ISDN. This has
been corrected.
9