Hardware And Software Requirements - Polycom V500 Release Note

Release Notes
V500 and VSX systems, version 8.5

Hardware and Software Requirements

2. Configure Conduits or Access List Assignments for the following ports:
For outbound interface
TCP 1720
TCP 3230 - 3235
TCP 3603
TCP 389
UDP 3230-3253
UDP 1718-1719
For inside interface, open all IP per video device.
Use the following command to configure conduits or access points:
conduit permit tcp host 255.255.255.255
eq port any
Where 255.255.255.255 is the external IP address of the SME Appliance.
If an endpoint receives inbound video calls from outside the LAN, use the
following command to create a static connection for each internal endpoint:
static (inside,outside) xxx.xxx.xxx.xxx iii.iii.iii.iii netmask
To access the web interface, use Microsoft Internet Explorer 6.0 or later as your
web browser and make sure that you have Java 1.2 or later installed.
To take advantage of the latest features for integrating a VSX system and
SoundStation VTX 1000 conference phone, the VSX system requires version 7.5
or later software and the VTX 1000 requires version 1.5 or later software.
The VSX 8000 is designed to work with the Polycom Vortex mixer. For this
configuration, you need Vortex firmware 2.5.2 or later, Conference
Composer™ version 2.7.0 or later, and VSX system software version 7.5 or
later.
Web streaming participants must have the Apple QuickTime player installed
on their PC to view the stream.
The following versions are required for compatibility with the Avaya
Communication Manager (ACM):
• iPower 6.0.0.315 or later
• ViewStation FX version 6.0 or later
• ViewStation version 7.0 or later
• PVX version 8.0 or later
39