Cerwin-Vega VEGA Series Manual page 7

Initial Out of the Box Configuration:
•
The Hub, out of the box, is configured as the LEFT speaker
•
The Satellite, out of the box, is configured as the RIGHT speaker.
This configuration can be changed using the SKAA cmd app and using a SKAA approved transmitter depending upon which
type of phone you have. Please refer to pages 18 thru 24 for more details regarding the SKAA cmd app or download the
PDF here: https://skaa.com/media/1233/do5580-skaa-cmd-users-guide-102116.pdf
For information on the various SKAA transmitters that can be used, please check our accessories on page 26.
Where to download the app?
•
For Android Phones the SKAA cmd app can be found on the Google Playstore:
https://play.google.com/store/apps/?hl=en_US&gl=US
•
For iPhone the SKAA cmd app can be found on the Apps Store
To see a complete listing of the SKAA cmd app commands/functionality the PDF can be downloaded at:
https://skaa.com/media/1233/do5580-skaa-cmd-users-guide-102116.pdf
Or see the SKAA cmd app directions shown on pages 18 thru 24.
If you alter the default LEFT & RIGHT speaker configuration using the app, a FACTORY RESET (6-clicks) on the bond button
will restore the speakers' factory defaults (Hub = Left, Sat = Right).
NOTES:
The HUB controls whether or not audio is sent from the HUB to the SAT and acts as the central brain.
The SAT only receives wirelessly; it never broadcasts audio.
The HUB accepts Bluetooth connections and outputs the audio it has received to the SAT using the embedded SKAA Pro
mode of transmission.
In using a SKAA transmitter to communicate with our VEGA monitor this implies that the HUB and SAT simultaneously
receive audio from the SKAA transmitter without the HUB needing to communicate with the SAT.
https://www.apple.com/app-store/
7