SKAA Bonding Mode Selection: HUB & SAT
See figure 2 below and bonding button "5".
The VOL control knob does double duty for functions.
•
If you rotate the knob left or right you can control the volume level of the speaker.
•
If you push the volume control button inward this changes the SKAA function as outlined on the silkscreen
graphics shown in figure 2 below.
•
For a more comprehensive listing of SKAA Bond Button functions and the number of clicks to use please see pages
15 and 16 in this manual or visit https://skaa.com/TLC
Figure 2: SKAA Bond Button & Bonding Table
Computer Wireless Connections using
Desktop or Laptop (Windows / MacOS / Linux), assuming USB "A" ports, see figure 3 below, bottom left side.
To connect to the HUB using BT:
a. Select BT mode on the HUB monitor (BT LED should lite up when in this mode) and pair with the Bluetooth
Source.
b. On the SAT, 2 - click the Bond Button (Vol Button) to place the SAT LED color in Amber color mode which will
bond to the HUB and audio can then be heard.
Bluetooth
Mode:
assuming computer has BT capability!
11