Cerwin-Vega VEGA Series Manual page 14

Cellphone Wireless Connections using SKAA Mode:
To connect to the VEGA Monitors using SKAA Mode.
1. For Android phone if your phone USB input connection is a type "C" then obtain a CASSANDRA (type C) SKAA
Transmitter (not included and sold separately, see page 26).
2. For Apple iPhone that has an input port for iOS lightning then obtain a DIZ Apple SKAA transmitter (not included
and sold separately, see page 26).
3. Connect your SKAA transmitter that you have purchased to your phone.
4. Begin to transmit audio on your iPhone or Android phone.
5. On the HUB monitor, place the HUB monitor into SKAA mode via the Input Mode Selection button (the SKAA LED
should be illuminated).
6. Depress the SKAA Bond while following the SKAA
is heard coming through the HUB monitor.
7. On the SAT if no audio is heard then depress the SKAA bond button (i.e., Vol button) while following the SKAA
RECEIVER USER'S GUIDE located on pages 15 and 16 until audio is heard coming through the SAT monitor.
Figure 5: Cellphone connection to Monitor using SKAA mode.
Android / Apple, please see figure 5 below.
RECEIVER USER'S GUIDE located on pages 15 and 16 until audio
®
14
®