Cerwin-Vega VEGA Series Manual page 18

4. Once all of the indicators stop flashing (turn solid Red),
QUESTIONS AND ANSWERS
Question
How does the You can store up to 10 SKAA transmitters on your Green List. These are your "favorite" audio sources.
Green List work? Every time you add a transmitter, it is assigned the first open spot on the Green List.
When you single click the
radio hunts for radio stations when you press seek.
If the Indicator is dim Green and flashes every few seconds, this tells you the receiver is hunting through
the Green List. Say you have 5 transmitters on your Green List; your receiver will hunt through the list one
by one: 1, 2, 3, 4, 5 and then back to 1 and so on. The dim Green Indicator flashes every time the receiver
moves to the next spot on the list. This hunting goes on for up to 1 minute.
If your receiver doesn't find any of your favorite transmitters, it stops hunting and just waits for the last
bonded favorite. If your receiver does find one of your favorite transmitters, the hunting stops, the
indicator turns bright green, and your receiver starts playing audio from that favorite.
A dim Green Indicator that is NOT flashing means the receiver is just sitting on one spot, waiting for a
specific favorite transmitter to show up.
How do I bond Play audio from your source device and ensure it has a SKAA transmitter connected.
with a specific
Green transmitter?
Click the
indicator as it goes. Once your receiver finds one of your favorite transmitters, it bonds to it and plays
audio from that transmitter. If that isn't the transmitter you wanted, click the Bond Button once more.
Repeat until your receiver bonds with the transmitter you want and you're hearing the correct audio
playing.
power off all of the receivers
Bond Button on your receiver. The receiver hunts through the Green List, flashing the
Answer
Bond Button, the receiver hunts through the Green List much like a car
18