Cerwin-Vega VEGA Series Manual page 13

Cellphone Connections to Monitor using Bluetooth Mode:
To connect to the VEGA Monitors using BT Mode: assumption both iPhone and Android have built in Bluetooth.
1. On the HUB press the mode input selector button to put the HUB into BT mode (BT LED will be lit).
2. Pair the HUB on your phone.
3. Once paired play some audio.
4. On the SAT monitor if audio is not already playing, then press the SKAA bond switch (i.e., Vol button) while
following the SKAA
the SAT monitor.
RECEIVER USER'S GUIDE located on pages 15 and 16 until audio is heard coming through
®
Figure 4: Cellphone to Monitor Connection using Bluetooth
Android / Apple please see figure 4 below.
13