Download Print this page

Cerwin-Vega VEGA Series Manual page 17

Wired / wireless monitors
Hide thumbs Also See for VEGA Series:

Advertisement

SKAA® RECEIVER USER'S GUIDE
Each SKAA receiver uses a Green List to remember your favorite audio sources (SKAA transmitters). A Green glowing
Indicator on your receiver means you are listening to a favorite, or hunting for one. You can also explore to find new
transmitters—an Amber Indicator means you are exploring for transmitters which are not on your Green List. The
Bond Button
on your receiver lets you select which audio source (SKAA transmitter) you're listening to.
Essentials
Button
Hold a few
Add / Delete Manually add / delete the current
seconds
transmitter to / from your Green List
Auto Add SKAA will automatically add the current Amber
transmitter to your Green List if you listen to it for 30
minutes
1 Click
Green Mode Rotate through your list of favorite transmitters
(Green List) — when a favorite transmitter is found, the
search stops and audio plays from that transmitter
2 Clicks
Amber Mode Explore for new, unknown
Transmitters (ones which are not already on your Green List)
3 Clicks
Mute do again to Unmute; any Click command will first
Unmute and then do its function
4 Clicks
Red Mode If you have 2 or more transmitters on your
Green List, power on just the one you want to hear and it
plays automatically.
6 Clicks
Factory Reset Clear Green List. Start Over!
Hold during
Make a Cluster of Receivers:
power on
1. Power off all transmitters and receivers
2. Power on the Master receiver while holding down its
3. With the remaining receivers within 3 meters of the
Command
Bond Button—hold the button down until the indicator
begins to flash Red
Master receiver, power on the first one, wait for its
Indicator to flash Red and then power on the second
one; continue until all of them are powered on
17
Indicator
to
= Added
(flash) = Deleted
to
= Added
(dim) = Hunting
(flash) = Next one
(bright) = Bonded
(dim) = Hunting
(bright) = Bonded
,
or
= Muted (slow-
flash)
(dim) = Hunting
(bright) = Bonded
(flash) = Reset Done
(flash) = Receiver has entered
'Cluster Up' mode
(bright) = The Cluster has been
successfully made

Advertisement

loading