2. Unboxing
2.3 Power-on guide
①
Network Settings
④
Self-inspection
Reminder: When the printing time of the device exceeds 300 hours, or if
the printing platform or nozzles have been replaced, the distance between
the platform and nozzles may change that caused the first layer of the
model may not stick firmly, resulting in printing failure. Please calibrate
the platform regularly.
②
Time Zone Settings
⑤
Self-testing
Note: The current interface is for reference only. Due to the continuous
upgrading of functions, it shall be subject to the latest firmware UI published
on the official website.
08
③
Creality Cloud binding
⑥
Self-test completed