Menu Settings; Menu Control (Dtv Mode); Picture Menu - Strong SRT 32HB4003 User Manual

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use INPUT to select another source.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the
submenus. Press MENU to exit the item.

5.2 Picture menu

Picture Mode
Colour Temperature
Aspect Ratio
Noise Reduction
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press t u to adjust.
Contrast
Brightness
Colour
Tint
Sharpness
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
Off
Low
10
Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and User.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User.
Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2.
Note: Some options may not be available under some sources.
Eliminates noise in the picture. Available choices are Off, Low, Middle and High.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fibre output of the entire picture, it will affect the dark
region of the picture.
Adjust the saturation of the colour based on your own preference.
No function
Adjust the peaking in the detail of the picture.
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn off video noise detection.
Detect and reduce low video noise.