Electronic Programme Guide (Epg); Menu Settings; Menu Control (Dtv Mode); Picture Menu - Strong SRT40FC4003 User Manual

NOTE:
Press OK to continue.
Crypted
Press pq t u to highlight the country that you want to install, then press OK to start searching.

4.0 ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing EPG on the
remote control. Press EPG to bring up the EPG interface. Use pq to select a programme. Press EXIT to
stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN
Access extra info of programme
YELLOW
Open the reminder setting over view
BLUE
Set reminder of selected programme.

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use INPUT to select another source.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the
submenus. Press MENU to exit the item.

5.2 Picture menu

Picture Mode
Colour Temperature
Aspect Ratio
Noise Reduction
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press t u to adjust.
Contrast
Brightness
Please check the settings for your cable system used by your provider!
Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and User.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User.
Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2.
Note: Some options may not be available under some sources.
Eliminates noise in the picture. Available choices are Off, Low, Middle and High.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fibre output of the entire picture, it will affect the dark
region of the picture.
9