Picture Menu - Strong SRT 24HC3023 User Manual

Sound System
Fine-Tune
Search
5.2.5 Channel extra settings
Programme Edit
Signal Information
Cl information
Logical Channel Numbering LCN
Channel Type
NOTE:

5.3 Picture menu

Picture Mode
Colour Temperature
Noise Reduction
5.3.1 Contrast/Brightness/Colour
If Picture Mode is set to Personal you are able to change the following settings
Press  to select an option, then press   to adjust.
Contrast
Brightness
Colour
Tint
10
Select the Sound system
Adjust the frequency of the channel
Start the channel search
Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Showing the information of current DTV channel. Only available with DTV
signal.
In the case you use an CI Module for decoding encoded channels, this menu
shows the internal menu of the card and/or CAM.
This function sort channels automatically to logic order in DVB-T modus if
broadcaster support this function. Press ENTER to select On or Off.
Select FTA to search Free-To-Air channels only, or ALL to search FTA and
Encrypted channels.
If Logical Channel Numbering function is set to ON then sorting of channels
is not possible in normally way.
Logical Channel Numbering and Channel Type functions are not available
when Satellite tuner is selected.
Select one of the automatic picture control mode. Available choices are
Dynamic, Standard, Mild. Select Personal to adjust Contrast, Brightness, Colour
and Sharpness as you like.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm.
Eliminates noise in the picture. Available choices are Off, Low, Middle, High and
Default.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fiber output of the entire picture, it will effect the dark
region of the picture.
Adjust the saturation of the colour based on your own preference.
No function