Bms Installation, Single Water Heater - Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions

BMS INSTALLATION, SINGLE WATER HEATER

The installation shown below features an EcoKnight™ water heater with BMS control, the BMS can send an on/off signal as required
depending upon the temperature within the storage vessel. This will be monitored by a BMS sensor shutting the EcoKnight™ water
heater down when the vessel is at set point. This application gives greater control and is suitable for installations when the DHW
demand is intermittent such as hotels. The EcoKnight™ water heater shunt pump will continue to run for a short period after the
burner has stopped firing to clear any residual heat from the heat exchanger. See 21.8.1.
15.2.1
S BMS
INGLE WATER HEATER WITH CONTROL
54