Basic Setup - Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions


Press SELECT (6)

Scroll using the DIAL (4) to Reset service reminder

Press SELECT (3)

It will ask you to confirm

Press SELECT (3)

You should see the word "engaged" briefly displayed.

Press the R/H SELECT (6) button three times to return to the front display screen
The service notification is now reset.
22.9.5
SERVICE NAME AND PHONE NUMBER
Please note that the brackets ([]) denote screen status.
When a Maintenance Reminder timer or counter has expired, a Maintenance Reminder screen will appear on the display. By
programming the installer's name and phone number, this information will appear on the Maintenance Reminder Screen at that
time. This can be programmed by accessing the Service Name and Phone Number parameter. When selected, another menu will
appear with PHONE and NAME.
1. Rotate the NAVIGATION dial to point to the name/phone number to program and press the NAVIGATION dial.
The screen will now display the selected item (either PHONE or NAME).
2. Press the NAVIGATION dial again. A cursor will appear at the bottom of the screen. By rotating the NAVIGATION dial,
various numbers and characters will appear. When the desired number/character is found, press the NAVIGATION dial.
The cursor will move to the next position.
3. Repeat this procedure until the entire message is entered. If you make a mistake and wish to back up one character,
rotate the NAVIGATION dial until the back arrow (m) character is displayed and press the NAVIGATION dial.
4. When finished, press the RIGHT SELECT [SAVE] key to return to the previous menu.
22.9.6

BASIC SETUP

The Basic Setup Menu contains the most frequently used parameters from the list above. See the descriptions above to set these
parameters.
22.9.7
USB
Parameter files can be copied directly to and from a USB flash drive. When USB is selected from the Main Menu, the display will
ask you to insert a flash drive into the USB-A (rectangular) port next to the display. Once a drive is inserted, the display will search
the root directory of this drive for a folder named "Lochinvar". If it does not find it, the display will ask if you want it to create this
folder. Press either the [YES] or [NO] key. If you press [NO], no further operations are allowed, so you must remove the flash
drive. If you press [YES], it will create the folder in the flash drive. If the flash drive contains a folder named Lochinvar, the display
will show all of the parameter files stored in that folder.
If you wish to copy the parameters from the Smart System control into the flash drive, press the [SAVE] key. The display will create
a file name based on the current date and time (year-month-date-hours-minutes). If you wish to cancel this operation, press the
[NO] key. If you wish to change the filename, press the NAVIGATION dial. The first character of the filename will flash. Rotate
the NAVIGATION dial to change this character. Once it is correct, press the NAVIGATION dial again, and edit the next character
as before. When the new filename is ready, press the [SAVE] key. The control will save the parameters to the flash drive, and the
new file will appear in the list of parameter files. Press the [EXIT] key to return to the Main Menu.
If you wish to copy a parameter file from the flash drive into the Smart System control, rotate the NAVIGATION dial until the file
you wish to copy is selected. Press the NAVIGATION dial once. The display will ask you if you want to load the parameters from
the file you selected. You can press [NO] to cancel the operation, or press [YES] to continue with writing the parameters into the
control. Once the loading process is complete, the display will return to the Main Status Screen
92