Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions page 28

Floor standing gas fired condensing circulating type water heater

Hide thumbs Also See for ECOKNIGHT EKW116CE:

Table of Contents

To install the flue connection to the EKW206CE – EKW236CE Water Heaters the following procedure should be followed:

Check you have all items shown above.

Check the flue temperature sensor (supplied with the Water Heater) is securely located into the hole on the exhaust

transition.

If the flue temperature sensor is not fitted, the flue gas may exceed the maximum temperature rating of the

flue and can lead to severe personal injury, death or substantial property damage.

Insert the air intake transition (Item 2) into the intake connection (Item 1) and tighten the worm drive clip.

Insert the exhaust transition (Item 3) into the flue collar (Item 4) and secure with the worm drive clip.

The completed installation should look like the photos shown below.

EXHAUST TRANSITION KIT FITTED EKW206CE-EKW236CE

10.10.3

TRANSITION KIT FITTED TO APPLIANCE

AIR INLET TRANSITION KIT FITTED EKW206CE-EKW236CE

Table of Contents