Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions page 83

Menu
ANTI-CYCLING
CONTROL MODES
BMS
Description
Anti-cycling Time
Anti-cycling Override Differential
Ramp Delay (Enable/Disable)
Modulation Factor
Controlling Sensor(Outlet/System Supply/Inlet)
Cascade Address
IF Address = 0:
Maximum Cascade Outlet Set Point
Cascade Offset Cascade Differential
Cascade Type (L/L, EFF) Minimum On/Off Time
Minimum Next On Time Minimum Pumps On
ELSE IF Address = 1: Alternate Leader?
(Y/N) IF Yes:
Maximum Cascade Outlet Set
Point
Cascade Offset Cascade
Differential Cascade Type (L/L, Eff) Minimum
On/Off Time Minimum Next On Time Minimum
Pumps On
Water heater Size
i. Cascade Address ii. Type
ii. Type
iii. Input
BMS (Active, Inactive) IF Active:
i. BMS Type (Power, Set Point) IF
Power:
1. Power at Minimum Volts
2. Power at Maximum Volts
ELSE:
1. Set Point at Minimum Volts
2. Set Point at Maximum Volts ii.
Minimum Volts
iii. Maximum Volts
iv. TStat Input (Active, Inactive) IF
Inactive:
1. On Volts
2. Off Differential Volts
ModBus/BACNet (Active, Inactive) IF
Active:
i. BAS Timeout
See User
Section Access
21.5 No
21.5
No
No
No
21.6 No
21.6 No
21.6 No
21.7
No
21.7
No
Installer
Access
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
83