High Voltage Connector Strip; Low Voltage Connector Strip - Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions
Floor standing gas fired condensing circulating type water heater
Hide thumbs
Also See for ECOKNIGHT EKW116CE:
- Installation manual (88 pages) ,
- Installation, commissioning, maintenance and user instructions (96 pages)
Table of Contents
Advertisement
HIGH VOLTAGE CONNECTOR STRIP
16.4.1
HIGH VOLTAGE CONNECTION STRIP
The output across each relay must not exceed 25Amps
OUTPUT
CONNECTION
PRIMARY
25 Amp relay
DE-STRAT
NO OUTPUT
RETURN
25 Amp relay
MAINS
16.4.2
HIGH VOLTAGE CONNECTION TERMINAL DETAILS
LOW VOLTAGE CONNECTOR STRIP
The low voltage connector strip is used on both EcoKnight water heaters and Herald boilers, as
such some connections will not be applicable to your installation.
NOTES
CONNECTION NOT USED
Connections for a 230V ~ 1 ph 50Hz power supply. NOTE: The
power supply cable should be secured using the anchor supplied.
60
Advertisement
Table of Contents
