Lochinvar ECOKNIGHT EKW116CE Installation, Commissioning, Maintenance And User Instructions page 39

TWIN-PIPE FLUE STARTER ASSEMBLY
The concentric flue assembly for models EKW206CE and EKW236CE consists of a twin-pipe flue system with a concentric
terminal- this system should be used if a twin-pipe assembly is required for these models.
See C33 CONCENTRIC VERTICAL FLUE SYSTEMS
When installing the water heater as a Type C53 appliance, it should be noted that the terminals must
not be installed on opposite sides of the building.
When installing the EcoKnight™ on a C
first including the flue temperature sensor.
If the flue temperature sensor is not fitted, the flue gas temperature may exceed the maximum
temperature rating of the flue and can lead to severe personal injury, death or substantial property
damage.
10.18.1
T T -P
YPICAL WIN IPE FLUE ARRANGEMENT USING CONCENTRIC
TERMINAL
To install a Type C terminal or air inlet, the procedure for either a Type C
53
should be followed noting that the annular space of the terminal should be sealed off.
MODELS EKW206CE,EKW236CE
twin pipe flue system, the Lochinvar Twin pipe flue starter assembly must be fitted
53
10.18.2
T C T -P
YPICAL WIN IPE FLUE ARRANGEMENT
53
(horizontal) or a Type C
13
(vertical) terminal
33
39