Successful Power-Up And Automatic Boot; Successful Power-Up To List Of Bootable Devices - DEC VAX 4000 300 Manual

Figure 2–3 shows a successful power-up and automatic boot when DIA0
has been selected as the boot device.
Figure 2–3: Successful Power-Up and Automatic Boot
KA670-A Vn.n, VMB n.n
Performing normal system tests.
66..65..64..63..62..61..60..59..58..57..56..55..54..53..52..51..
50..49..48..47..46..45..44..43..42..41..40..39..38..37..36..35..
34..33..32..31..30..29..28..27..26..25..24..23..22..21..20..19..
18..17..16..15..14..13..12..11..10..09..08..07..06..05..04..03..
Tests completed.
Loading system software.
(BOOT/R5:0 DIA0)
2..
-DIA0
1..0..
Loading System Software (No Boot Device Selected)
If you have not selected a boot device when the Break Enable/Disable switch
is set to disable, the system runs self-tests and, on completion, issues a list
of bootable devices. You are prompted to select a boot device from the list,
as shown in Figure 2–4.
Figure 2–4: Successful Power-Up to List of Bootable Devices
KA670-A Vn.n VMB n.n
Performing normal system tests.
66..65..64..63..62..61..60..59..58..57..56..55..54..53..52..51..
50..49..48..47..46..45..44..43..42..41..40..39..38..37..36..35..
34..33..32..31..30..29..28..27..26..25..24..23..22..21..20..19..
18..17..16..15..14..13..12..11..10..09..08..07..06..05..04..03..
Tests completed.
Loading system software.
No default boot device has been specified.
Available devices.
-DIA0 (RF72)
-DIA1 (RF72)
-MUA0 (TK70)
-EZA0 (08-00-2B-06-10-42)
Device? [EZA0]:
To select a boot device, enter a device name at the system prompt. When you
have selected a boot device, the system boots from that device. Figure 2–5
shows a successful power-up when DIA0 has been selected as the boot
Operating the System 2–7