3.1.4.2 Setting the Write-Protect Tab on the Cassette Tape
If you wish to read or copy from a tape, set the write-protect tab on the
cassette to write protect. This disables writing to tape, and ensures data
integrity. Use a pen (not pencil) to set the write-protect tab (Figure 3–14)
to the desired position.
Observe the following guidelines when setting the write-protect tab.
•
If you are reading data (copying from tape), set the write-protect tab to
write protected.
•
If you are writing data, set the write-protect tab to write enabled.
•
Write-protect tab position displays in front panel tape indicator.
Operating the System Options
3–33