Table of Contents
Advertisement
This manual describes how to use VAX 4000 Model 300 timesharing and
VAXserver 4000 Model 300 server systems. The hardware and software
for each of these systems differs slightly, according to the function of the
system. The VAX 4000 is a multiuser system that uses the VMS operating
system. The VAXserver 4000 system is a single-user system that uses VMS
or VAXELN operating systems. Both systems can function as an end- or
full-function node on an Ethernet network.
The manual is structured as follows:
•
Chapter 1 provides an overview of the systems.
•
Chapter 2 describes how to use each system.
•
Chapter 3 describes how to use options installed in the systems.
•
Appendix A lists related documentation.
•
Appendix B describes how to set and examine DSSI device parameters
from console mode.
•
Appendix C describes procedures for creating backup files.
•
Appendix D describes how to use VMSTAILOR to remove unwanted
VMS files from the system disk.
•
A glossary explains key terms.
NOTE: VAXserver systems are designed to offer maximum performance for
applications that do not require timesharing. Some of the devices referred to
in this manual are designed for multiuser systems and may not be suitable
for server systems. Contact your Digital service representative if you have
any questions about whether use of a specific device is appropriate for your
server system.
Preface
ix
Advertisement
Table of Contents
