Error Codes - Elation FUZE SPOT User Manual

ERROR CODES

ERROR CODES
PAN Er
TILT Er
RotGobo
RotGobo2
Iris
RotGoboIndex
RotGobo2Index
Animation
Anima.Index
Zoom
Focus
Frost
Prism
PrismIndex
HeadTemp
CoolFan1
CoolFan2
CoolFan3
CoolFan4
BaseTemp
BaseFan
Error Codes subject to change without notice.
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the
magnetic-indexing circuit malfunctions (sensor failed, or
magnet is missing) or there is a motor failure (defective motor
or a defective motor IC drive on the main PCB). This error may
also be displayed if the head/yoke was blocked during a reset
function.
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the
magnetic-indexing circuit malfunctions (sensor failed, or
magnet is missing) or there is a motor failure (defective motor
or a defective motor IC drive on the main PCB).
These messages will appear if there is a temperature and/or fan
malfunction.
DESCRIPTION
38