Page 2
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000 +52 (728) 282-7070 D O C U M E N T V E R S I O N Due to additional product features and/or enhancements, an updated version of this document may be available online.
C O N T E N T S General Information Warranty Returns (USA Only) Safety Guidelines Maintenance Guidelines Fixture Overview Colors Snoot Installation Installation Guidelines System Menu LED Color Programming Guidelines DMX Channel Functions and Values Color Temperature Table Virtual Gel Swatch Book Table Error Codes Specifications Optional Accessories...
Omega Brackets (x2) Locking Power Cable CUSTOMER SUPPORT Contact ELATION Service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET +31 45 546 85 63 | Fax +31 45 546 85 96 | support@elationlighting.eu...
To obtain warranty service, a Return Materials Authorization (RMA) number must first be obtained from ELATION. It is the Customer’s responsibility to provide product proof of purchase and serial number by acceptable evidence such as an invoice copy or an approved ELATION Extended Warranty Certificate (“EWC”) and any relevant maintenance records at the time warranty service is sought.
S A F E T Y G U I D E L I N E S This fixture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ PRODUCTS, LLC is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual.
Page 7
S A F E T Y G U I D E L I N E S DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before serving. DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from an authorized Elation dealer.
F I X T U R E O V E R V I E W Le n s B atter y Leve l UP B utto n I ndi cato r Se rv ice Por t EN T ER Bu tto n M ENU B utto n D OWN B utto n Syste m Me n u Dis play...
COLORS Colors Color Temperature Green Shift Cyan Full Minus Green to Magenta Neutral Yellow 2700K – 8500K Neutral White Green Blue Mint Neutral to Full Plus Green Amber Virtual Gel Swatch Book Colors Pale Yellow Pink Sky Blue Straw Medium Pink Pale Navy Blue Gold Tint Dark Pink...
S N O O T I N S T A L L A T I O N 1. Place fixture on the stable flat surface and let cool for 15mins. 2. Align Snoot onto front lens so 4 screw holes on snoot match 4 screw holes on lens. 3.
I N S T A L L A T I O N G U I D E L I N E S FLAMMABLE MATERIAL WARNING Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations. USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON THIS FIXTURE.
Page 13
I N S T A L L A T I O N G U I D E L I N E S OMEGA BRACKETS INSTALLATION Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the Omega Brackets to the fixture by turning each quick-lock fastener ¼...
Page 14
LEDs. This issue is not specific only to ELATION lighting fixtures, it is a common issue with lighting fixtures from all manufacturers. Although there is no true way to fully prevent this issue from happening, the guidelines below can prevent any potential damage from occurring if followed.
S Y S T E M M E N U The fixture includes an easy to navigate system menu. The LCD touch panel display located on the front of the fixture (see image below), provides access to the main system menu and is where all necessary system adjustments are made to the fixture.
Page 16
S Y S T E M M E N U ELATION FUZE WASH FR Default setting shown in bold ≥ Supports Software Versions: 1.04 MAIN MENU OPTIONS / VALUES (Default Settings in BOLD) DESCRIPTION Used to set the units desired DMX...
Page 17
MAIN MENU OPTIONS / VALUES (Default Settings in BOLD) DESCRIPTION Set Manual Control values remain Pan, Tilt, Red, Green, Blue, Mint, 000-255 set when no DMX signal is present, Amber, ..., Control including through a power cycle. Tilt 000-255 000-255 Green 000-255 Manual...
C O L O R L E D P R O G R A M M I N G G U I D E L I N E S The fixture utilizes an advanced additive LED light engine that contains Red, Green, Blue, Mint and Amber LED which when combined, provides a brilliant high CRI White.
D M X T R A I TS: C H A N N E L F U N CT I O N S & VA LU ES ELATION FUZE WASH FR DMX Channel Values / Functions Supports Software Versions: ≥ 1.04 Features subject to change without notice.
Page 20
MODE/CHANNEL VALUE FUNCTION DEFAULT SNAP Standard Extended CMY CMY Extended Color Wheel: Open 1-60 Virtual Swatch Book (see separate sheet) 61-179 Open Color Scroll 180-201 Clockwise,fast→slow 202-207 Stop 208-229 Counter-clockwise,slow→ fast 230-234 Open Random Slots 235-239 Fast 240-244 Medium 245-249 Slow 250-255 Open Focus: 0-255...
Page 21
MODE/CHANNEL VALUE FUNCTION DEFAULT SNAP Standard Extended CMY CMY Extended Iris: 0-191 Max. diameter to Min.diameter 192-223 Pulse opening fast to slow 224-255 Pulse closing slow to fast Frost Light 0-255 Open to Full Frost Frost Medium 0-255 Open to Full Frost Blade 1A 0-255 Open to Close...
CO LO R T E M P E R AT U R E VALUE COLOR TEMPERATURE (K) VALUE COLOR TEMPERATURE (K) 2400 5500 2500 5600 2600 5700 2700 5800 2800 5900 2900 6000 3000 6100 3100 6200 3200 6300 3300 6400 3400 6500...
V I RT UA L G E L S WATC H B O O K COLOR COLOR VALUE FILTER NUMBER VALUE FILTER NUMBER Pale Yellow Mauve Straw Medium Purple Gold Tint Lavender Spring Yellow Palace Blue Medium Yellow Dark Blue Yellow Medium Blue Deep Amber...
E R R O R C O D E S Error Codes subject to change without notice ERROR CODES DESCRIPTION Movement is not located in the default position after the reset. These messages will appear after a fixture reset if the magnetic-indexing circuit malfunctions (sensor failed, or magnet is missing) or there is a motor failure (defective motor or a defective motor IC drive on the main PCB).
S P E C I F I C A T I O N S SOURCE 480W 6,500K RGBMA (Red, Green, Blue, Mint, Amber) LED Engine 30,000 Hour Average LED Life* *Test lab conditions. May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
Page 29
D I M E N S I O N S *Drawings not to scale. Specifications and improvements in the design of this unit and this manual are subject to change without notice. 10.8in. [274.2mm] Ø7.2in. [Ø183.1mm] 4.41in. [112mm] 10.08in. [256mm] 12.20in.
O P T I O N A L A C C E S S O R I E S ORDER CODE ITEM TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp SIP126 5 ft. (1.5m) IP65 Twist Lock Power Link Cable AC5PDMX5PRO 5 ft.