Remote Device Management (Rdm) - Elation FUZE SPOT User Manual

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: For RDM to work properly, RDM enabled equipment must be used throughout
the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the device to be managed,
modified, and monitored remotely (hence, remote device management). This protocol
is ideal for fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM
enabled controller to send out a signal to devices on the wire, as well as allowing the
fixture to respond (known as a GET command). The controller can then use it's SET
command to modify settings that would typically have to be changed or viewed
directly via the unit's display screen, including the DMX Address, DMX Channel Mode,
and Temperature Sensors.
Model
FUZE SPOT
FIXTURE RDM INFORMATION:
Please be aware that not all RDM devices support all RDM features, and therefore
it is important to check beforehand to ensure that the equipment that you are
considering includes all the features that you require.
The following parameters are accessible in RDM on this device:
[0x0011] Proxied Device Count
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
[0x0401] Lamp Hours
[0x0402] Lamp Strikes
[0x0403] Lamp State
[0x0404] Lamp Mode
[0x0405] Device Power Cycles
RDM Code
0×22A6
[0x0600] Pan Invert
[0x0601] Tilt Invert
[0x0602] Pan Tilt Swap
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x1031] Preset Playback
[0x0122] Default Slot Value
[0x00B0] Language
[0x00A0] Language Capabilities
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages
[0x1001] Reset Device
[0x0016] Undefined PID [0x0016,(22)]
35
Device Model ID
Decimal/Hexdecimal
0002
Personality ID
Standard(1) Extend(2)
CMY Standard (3) CMY
Extend (4)