Error Codes - Elation FUZE WASH FR User Manual

E R R O R C O D E S

ERROR CODES

Movement is not located in the default position after the reset.
PAN These messages will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed, or magnet is missing) or there is a motor failure
(defective motor or a defective motor IC drive on the main PCB). This error may
Tilt
also be displayed if the head/yoke was blocked during a reset function.
Movement is not located in the default position after the reset. These messages
Zoom
will appear after a fixture reset if the magnetic-indexing circuit malfunctions
Focus
(sensor failed, or magnet is missing) or there is a motor failure (defective motor
Blade
or a defective motor IC drive on the main PCB).
Blade Fan
Cool Fan1
Cool Fan2
Cool Fan3
Cool Fan4 These messages will appear if there is a temperature and/or fan malfunction.
Base Fan1
Base Fan2
HighLEDTemp
High Base
Error Codes subject to change without notice
DESCRIPTION
2 7