Table of Contents
Advertisement
SNOOT INSTALLATION
4-Ø3.5mm [Ø0.14in]
Ø148mm [Ø5.83in]
snoot
Ø136mm [Ø5.35in]
1. PLACE FIXTURE ON THE STABLE FLAT SURFACE AND LET COOL FOR 15MINS.
2. Align Snoot onto front lens so 4 screw holes on snoot match 4 screw holes on lens.
3. Carefully using a hand screwdriver, insert/secure included 4 screws.
4. Check Snoot to confirm it is seated properly and all 4 screws are secure.
DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER!
17
Advertisement
Table of Contents
