E R R O R C O D E S
ERROR CODES
PAN Er
TILT Er
RotGobo
RotGobo2
Iris
RotGoboIndex
RotGobo2Index
Animation
Anima.Index
Zoom
Focus
Frost
Prism
PrismIndex
HeadTemp
CoolFan1
CoolFan2
CoolFan3
CoolFan4
BaseTemp
BaseFan
Error Codes subject to change without notice.
DESCRIPTION
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the magnetic-
indexing circuit malfunctions (sensor failed, or magnet is missing)
or there is a motor failure (defective motor or a defective motor IC
drive on the main PCB). This error may also be displayed if the
head/yoke was blocked during a reset function.
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the magnetic-
indexing circuit malfunctions (sensor failed, or magnet is missing)
or there is a motor failure (defective motor or a defective motor IC
drive on the main PCB).
These messages will appear if there is a temperature and/or fan
malfunction.
36