Custom Gobos - Elation FUZE SPOT User Manual

CUSTOM GOBOS

* * * IMPORTANT NOTICE REGARDING CUSTOM GOBOS * * *
Due to the high temperature optical system, special material as listed above is required for
custom gobos. Due to varying manufacturing processes and tolerances, it is highly
recommended to provide a gobo sample and holder from the fixture to the custom gobo vendor
for accurate sizing. Extended testing of custom gobo designs is highly recommended prior to
use. Contact ELATION SERVICE for further information.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 |
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 546 85 96 |
Ø 25.0 mm
GOBO MAX I.D.
Ø 29.9 mm
GOBO MAX O.D.
Ø 30.0 mm
GOBO HOLDER
FUZE SPOT ROTATING GLASS GOBOS - WHEELS 1 & 2
Gobo O.D. (Max. Outer Diameter) ф29.9mm
Gobo I.D. (Max. Image Diameter)
Gobo Holder Diameter
Gobo Thickness
Gobo Material
ф25.0mm
ф30.0mm
ф 1.1mm
High Temp Glass
(Max 600C°)
support@elationlighting.com
support@elationlighting.eu
12
Ø 1.1 mm
THICKNESS