Table of Contents
Advertisement
> To activate the automatic thread cut before changing a thread, tap the switch in the upper section of the
display (1) again.
> Tap the switch in the middle section of the display (2) so that the machine will stop after about 7 stitches
and the remaining thread can be cut manually.
> Tap the switch in the middle section of the display (2) again and the machine won't stop for a manual
thread cut.
> To adjust the length from where the connecting stitches are cut, tap «Minus» or «Plus» (3).
Changing the measuring unit
The measuring unit in the Embroidery Mode can be changed from mm to inch. The standard setting is in
mm.
> Tap «Setup Program».
> Tap «Embroidery settings».
> Tap «Measuring unit».
> To display the measurements in the Embroidery Mode in inch, tap «inch».
> To display the measurements in the Embroidery Mode in mm, tap «mm».
3.3 Selecting personal settings
> Tap «Setup Program».
> Tap «Personal Settings».
> Select the required display color and background.
> Tap the text box above the color settings.
> Enter the welcome message.
> To use upper-case letters, tap «Upper Case Characters» (standard setting).
ABC
> To use lower-case letters, tap «Lower Case Characters».
abc
> To use figures and mathematical symbols, tap «Numbers and Mathematical Characters».
123
> To use special characters, tap «Special Characters».
@&!...
> Tap the text box above the keyboard to delete the entered text completely.
Setup Program
57
Advertisement
Table of Contents
