Dalsa Falcon 4-CLHS Series User Manual page 88

User Shading Coefficients 1
File Operation Execute
File Open Mode
File Access Offset
File Access Length
File Access Buffer
File Size
File Operation Selector
File Operation Status
Success
Invalid Parameter
Write Protect
File Invalid
File Not Open
File Too Big
File Operation Result
Save Last Image to Flash
86  Operational Reference
LUT
ShadingCoefficients1
FileOperationExecute
FileOpenMode
Read
Write
FileAccessOffset
FileAccessLength
FileAccessBuffer
FileSize
FileOperationSelector
Open
Close
Read
Write
FileOperationStatus
InvalidParameter
FileOperationResult
saveLastImageToFlash
LUT LUT.
Lens Shading coefficients set 1.
Executes the operation selected by File Operation
Selector on the selected file.
Selects the access mode used to open a file on
the device.
Read Select READ only open mode.
Write Select WRITE only open mode.
Controls the file Offset where the read or write
operation will be perform.
The number of bytes to transfer between the file
and the FileAccessBuffer.
Defines the intermediate access buffer that allows
the exchange of data between the device file
storage and the application.
Represents the size of the selected file in bytes.
Selects the target operation for the selected file in
the device.
Open Select the Open operation – executed by
FileOperationExecute.
Close Select the Close operation – executed by
FileOperationExecute
Read Select the Read operation – executed by
FileOperationExecute.
Write Select the Write operation – executed by
FileOperationExecute.
Returns the status of the last file operation.
Success The last file operation has completed successfully.
The last file operation has completed
unsuccessfully because of an invalid parameter.
WriteProtect The last file operation has completed
unsuccessfully because the file is read-only.
FileInvalid The last file operation has completed
unsuccessfully because the selected file in not
present in this camera model.
FileNotOpen The last file operation has completed
unsuccessfully because the selected file has not
been opened.
FileTooBig The last file operation has completed
unsuccessfully because the file is larger than
expected.
The number of successfully read/written bytes
during the last operation.
Command that saves the last acquired image to
camera flash memory. Use the file transfer
feature to read the image from camera.
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Guru
1.00
Beginner
Invisible
Falcon™ 4-CLHS Series