Dalsa Falcon 4-CLHS Series User Manual page 75

Cycling Preset Incremental
Source
None
Valid Frame Trigger
Counter 1 End
Start of Frame
Line2
Cycling Preset Repeater
Cycling Preset Reset
Source
Valid Frame Trigger
Counter 1 End
Acquisition End
Software
Cycling Preset Reset
Cycling Preset Current
Active Set
Features Activation
Selector
Exposure Time
Exposure Delay
Output Line3
Output Line4
Output Line5
Output Line6
Multiple ROI
DigitalGain
Features Activation Mode
Off
Active
Cycling Preset Selector
Falcon™ 4-CLHS Series
cyclingPresetIncrementalSource
None
ValidFrameTrigger
Counter1End
StartOfFrame
Line2
cyclingPresetRepeater
cyclingPresetResetSource
ValidFrameTrigger
Counter1End
EndOfAcquisition
Software
cyclingPresetResetCmd
cyclingPresetCurrentActiveSet
cP_FeaturesActivationSelector
ExposureTime
ExposureDelay
OutputLine3Control
OutputLine4Control
OutputLine5Control
OutputLine6Control
MultiROI
DigitalGain
cP_FeaturesActivationMode
Active
cP_PresetConfigurationSelector
Specifies the source that increments the currently active
cycling preset.
Feature cyclingPresetCurrentActiveSet is used to select the
current active set.
Increment on a Valid Frame Trigger.
Increment on the end of Counter 1.
Increment on the Start of Frame event.
Select Line 2 (and associated I/O control block) to use as
the external increment source.
Specifies the required number of cycling preset increment
events (generated by the Cycling Preset Incremental
Source) to increment the index of the Cycling Preset Current
Active Set. The difference with cyclingPresetRepeater is that
this feature value is specific to the current cycling set
specified by cP_PresetConfigurationSelector.
Specifies the source that resets the currently active cycling
preset to the first set.
Reset when a Valid Frame Trigger occurs.
Reset when Counter 1 ends.
Use End of Acquisition as the reset source. An End of
Acquisition occurs on acquisition stop.
Use a software command as the reset source.
Reset the position of the preset cycling to 1 and the count to
0.
Specifies the currently active cycling preset.
Selects the feature to control by the
cP_FeaturesActivationMode feature.
The cP_FeaturesActivationMode feature controls the
exposure time.
The cP_FeaturesActivationMode feature controls the
exposure delay.
The cP_FeaturesActivationMode feature controls output
line3.
The cP_FeaturesActivationMode feature controls output
line4.
The cP_FeaturesActivationMode feature controls output
line5.
The cP_FeaturesActivationMode feature controls output
line6.
The cP_FeaturesActivationMode feature controls the ROI
positions. Only OffsetY is cycled, the height of each ROI is
from multi ROI height on Image Format page. Smaller ROI
id has smaller OffsetY Enable MultiROI mode to activate
cyclying MultiROI.
The cP_FeaturesActivationMode feature controls the digital
gain.
Enable the selected feature to be part of the cycling. When
activating the selected feature, this will automatically set the
corresponding standard camera feature to read only.
Off Exclude the selected feature from the cycling.
Include the selected feature in the cycling.
Selects the Cycling Preset to configure its feature.
Operational Reference  73
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC
1.02
Expert
DFNC