SMC Networks HRR050-A 20 Series Operation Manual page 86

HRX-OM-X071
Chapter 5 Display and Setting of Various Functions
Changing of electric conductivity rise alarm
8.
Press the [▼] key. Displays screen for setting value of electric conductivity rise alarm
threshold.
Displayed only when Option DM is selected [With electric conductivity control function,
Applicable to DI water piping].
RUN
Alarm: The user can decide the chiller operation if alarm "AL12 electric conductivity rise "
occurs.
Set value
OFF
WRN
Setting for electric conductivity rise alarm
9.
Press the [▼] key. Displays screen for setting value of electric conductivity rise alarm
threshold.
Displayed only when Option DM is selected [With electric conductivity control function,
Applicable to DI water piping].
RUN
The user can change the threshold of "AL12
● ：0.4 to 46.0 µS/cm(
Setting range
Setting of NOT TEMP READY alarm
10.
Press the [▼] key. Displays screen for changing the chiller behaviour when the NOT
TEMP READY alarm occurs.
RUN
The user can decide the chiller behaviour if alarm "AL13: NOT TEMP READY" occurs.
Set value
OFF Alarm is not generated.
Operation of this product will continue when the alarm
WRN
occurs.
FLT
Operation of this product will stop when the alarm occurs.
5.5 Advanced setting mode
5-36
Operation at occurrence of electric conductivity rise alarm
DIHI ⇒ ALARM( Alternately displayed )
Contents
Alarm is not generated.
Operation of this product will continue when the
alarm occurs.
El ectric conductivity rise alarm threshold
Initial value
Operation at occurrence of NOT TEMP READY alarm
TEMP ⇒READY ⇒ ALARM( Alternately displayed )
Contents
."
electric conductivity rise
：45.0 µS/cm)
Initial value
―
○
unit
：µS/cm
Initial value
○
―
―
HRR Series