SMC Networks HRR050-A 20 Series Operation Manual page 100

HRX-OM-X071
Chapter 5 Display and Setting of Various Functions
Set value
OFF
No output signal
RUN
Operation status signal output
RmT Remote status signal output
EXTC
Unused
RDY
Ready completion (TEMP READY) signal output
TOUT
TEMP OUT (temperature is out of the range) signal output
FLT
FLT (operation stop) alarm signal output
WRN
WRN (operation continue alarm) signal output
mANT
Notice for maintenance signal output
ALm
Alarm status signal output
SW1
Pass through signal of the contact input signal 1
SW2
Pass through signal of the contact input signal 2
ASEL
Selected alarm status signal output
mSEL
Selected notice for maintenance signal output
Contact output signal 1 Operation
14.
Press the [▼] key. Displays screen for setting the operation for the Contact output
signal 1.
Select the Contact output signal 1 operation.
Contact output signal 1 Select alarm
15.
Press the [▼] key. Displays screen for setting the selected alarm for the Contact output
signal 1. The alarm is valid when the "selected alarm status signal output" is active.
Select the alarm No. to be allocated to Contact output signal 1
●Setting range：AL.01 to AL.32(Default value：AL.01)
5.5 Advanced setting mode
5-50
Explanation
Contact output signal 1 operation
DOUT ⇒ TYPE( Alternately displayedd )
Set value Contents
A
N.O. type
B
N.C. type
Contact output signal 1 selected alarm No.
DOUT1 ⇒ ALARM ⇒ CODE( Alternately displayed )
(Default setting)
Initial value
○
―
Initial value
―
○
―
―
―
―
―
―
―
―
―
―
―
―
HRR Series